captjack 🏴☠️✨💜 @captjack - 2y
#JBOD #RAID0 #LVM Quick Tip #techstr #HDD #SSD (no backup/redundancy in any) Common / Advantage *Cheap + Small Size* HDDs/SSDs can be clustered for non-critical large data only vs Individual disk disadvantage – super high cost- single of failure – cannot expand captjack’s pick LVM – easier to manage disks add/replace diff size sata hdd-s
14d84 - 2y
ZAPPPPOW!!!!
captjack 🏴☠️✨💜 @captjack - 1y
are u familiar with cli linux ? then do below u need physicall attach your HDD using SATA or USB / reboot possibly ssh-> into ur box start9/umbrel/embassy whatever lsblk (to find the preformatted device /dev/sdd) sudo mkdir /hdd20 mount /dev/sdd /hdd20 filebrowser -r /hdd20 -a lanip -p 555 if u have used windows means ntfs formatted below adv user u wanna **old cheap** disks for data which can **lose** disk fails #[2]
#[2]
captjack 🏴☠️✨💜 @captjack - 11mo
#[2] #[3] most likely LVM was enabled at 1st in original node hardware box - unless it was VM so 1. backup all key/seed/config data outside DISK 2. add additional disc - rebuilt again from scratch unless u temporary 1TB storage to copy data out n mave back to after LVM2 disks are built 3. u need linux cli knowledge / search tools many free tips in or outside nostr
typo - most likely NO LVM enabled in ur box so u have enable it in fresh partition HDD (erasing all in hdd)
realjode @realjode - 11mo
Thanks for that , it looks a bit more complicated than I thought it would be , have found some resources on lvm and instantly needed a nap 😴 I’ll get my head around it though 🫂🤜🏼💥🤛🏼
sure good idea - also check specs of interface SATA3 etc - so u can easily expand disk by disk #[5]
